User guide

 User Guide
Page 74
OSD Menu Operation
5. Select [WEEKDAYS] and press “Enter” button
to select the day of time slot added in a week. Use
“Up” or “Down” button to enable the day.
From left to right, the day options are Sunday (S),
Monday (M), Tuesday (T), Wednesday (W),
Thursday (T), Friday (F) and Saturday (S). Press
“Enter” button to apply the weekdays setting.
6. In [ADD SCHEDULE] menu, select [START
TIME] and [END TIME] to choose the time
interval for the schedule recording. Press “Enter”
button and use “Up” or “Down” button to
select the time. A time slot is minimum 10 minutes
long. Finally, press “Enter” button to apply the
time settings.
Note that :
If [END TIME] is earlier than [START
TIME], it will assume the end time is on
next day.
E.g. Monday, start time : 18:00, end time :
09:00
The schedule period is from Monday 18:00
to Tuesday 09:00.
7. In [ADD SCHEDULE] menu, select [CAMERA]
or [FRAME RATE] to choose the frame rate or
camera respectively.
8. If user selects motion recording in [TYPE] option,
user should set motion settings in [GENERAL
MOTION SETTING] option.
SCHEDULE WEEKDAY
S M T W T F S
TI ME
02 : 00
ADD SCHEDULE
TYPE MOTION REC
WEEKDAYS SMTWTFS
START TI ME 00 : 00
END TIME 02 : 00
CAMERA 1234
FRAME RATE CONTINUOUS
GENERAL MOTION SETTING . . .
APPLY ENTER
ADD SCHEDULE
TYPE MOTION REC
WEEKDAYS SMTWTFS
START TI ME 00 : 00
END TIME 02 : 00
CAMERA 1234
FRAME RATE CONTINUOUS
GENERAL MOTION SETTING . . .
APPLY
ENTER