User guide

 User Guide
Page 70
OSD Menu Operation
Main Menu

 Setup

Video

Camera Setting

 Camera X Setting


 General PTZ Setting

 Advance PTZ Setting
PTZ DRIVER : Select the PTZ camera driver
BIT RATE : Select the PTZ camera bit rate
Main Menu

 Setup

Video

Local Monitoring
CLOCK POSITION : Change the clock position
CAMERA NAME POSITION : Change the camera name position
SEQUENTIAL SWITCH TIME : Change the switch time between each live
camera display for sequential mode monitoring
SEQUENTIAL MODE CAMERAS : Select cameras for sequential mode monitoring
DEFAULT DISPLAY MODE : Select default display mode in CCTV monitor
after  RX video recording server boot
up
HORIZONTAL POSITION : Change horizontal position of local video output
VERTICAL POSITION : Change vertical position of local video output
HORIZONTAL SCALE : Change horizontal scale of local video output
VERTICAL SCALE : Change vertical scale of local video output
For [HORIZONTAL POSITION], [VERTICAL POSITON], [HORIZONTAL SCALE]
and [VERTICAL SCALE] options, change these options if live video position or size display
does not fit in the local CCTV monitor.
LOCAL MONITORING
CLOCK POSITION BOTTOM
CAMERA NAME POSITION TOP
SEQUENTIAL SWITCH TIME 1SEC
SEQUENTIAL MODE CAMERAS 1-3-
DEFAULT DISPLAY MODE QUAD
HORIZONTAL POSITION 5
VERTICAL POSITION 0
HORIZONTAL SCALE 10
VERTICAL SCALE 2
ADVANCE PTZ SETTING
PTZ DRIVER TELEEYE DM4 . . .
BIT RATE 9600