User guide

 User Guide
Page 55
Basic Installation for Local and Remote Monitoring
11.b.5.
Run WX-
30 software which has been installed to
the PC. (For details of WX-30 software
installation, please refer to WX-30 Software
Guide)
11.b.6. Choose [Transmitter]  [Registration] to
register the  RX video recording
server. User is required to input video recording
server serial number and registration code.
For example :
Serial No. : VTC12345
Registration Code : 1234567890
11.b.7. Press [Connect] icon to pop up the
[Connect Window]. For example, type and
select the following setting :
Phone/IP :
29955992 (Phone number of the video recording
server)
Connect Using :
General modem to COM1
(Modem Driver)
Password: 000000
If RX is set to advanced security mode, check
Advanced security mode box and enter User
Name