User guide

 User Guide
Page 1
Introduction
SECTION 1
Introduction
A. Introduction
 RX Series Video Recording Server operates with its revolutionary multi-rate
video coder to fulfill the highest video coding requirements for simultaneous transmission and
recording. Seamless video transmission by  RX can be performed in low and
medium bandwidth communication networks including ADSL, ISDN and PSTN; whilst
DVD-quality videos can be transmitted through LAN and recorded into local hard drive with
optimum speed at 50/60fps at D1 resolution. Real time recording rate of up to 200/240fps on
all video channels can also be achieved at CIF resolution.
 RX provides professional and real life security control of premises with its
sophisticated event management scheme. It responses to a wide range of events triggered by
external alarm sensor, video motion, power interruption and tamper. There is an arm/disarm
control for the event management mechanism. Every external alarm input is configurable with
an individual entry/exit delay, fire zone and tamper detection setting. Various actions like
sending video back to a designated receiving PC, video recording, email notification, etc. can
be performed.  RX can also keep a comprehensive log of the events for audit trail.
 RX is designed to fully comply with the British Standard BS 8418:2003,
providing professional remote monitoring and visual alarm verification solution to central
monitoring station.
With a built-in DVD-writer, video footage stored inside  RX can be easily
extracted for evidential purposes. Recorded video can be backed up in CD/DVD and played
back in any PC without any special software.