User guide

 User Guide
Page 48
Basic Installation for Local and Remote Monitoring
11.b.15.
Press [Apply] icon to save the
network setting and pop up the message board.
After several seconds, the video recording
server will restart automatically.
11.b.16. In Windows 2000/XP desktop, select Start >
Control Panel
11.b.17. Double click Network and Dial-up
Connections > right click Local Area
Connections and choose Properties.
11.b.18. Choose Internet Protocol (TCP/IP) and click
Properties
11.b.19. Enter the IP address, subnet mask and Default
gateway for the PC to restore to its original
network configuration.
11.b.20. Click OK to apply the setting
12. Disconnect the video recording server and current PC. Reconnect the video recording server
and current PC to the Internet network through straight-through Ethernet cable.
13. Check Ethernet socket of both the video recording server and PC to ensure that the
{GREEN LINK LED} turns ON. Then connection diagram is shown as follows:
RG59 cable
RG59 cable
Power Adapter
Ethernet
Socket
CCTV
Monitor
    RX
Cameras
www.your_site.your_company.teleeye.net
211.134.139.7
211.134.139.9
Internet
210.17.139.1
Router/Gateway
211.134.139.1
Router/Gateway
Primary DNS: 202.14.67.4
Secondary DNS: 202.14.67.14
Straight-through Ethernet cable
Straight-through Ethernet cable