User guide

 User Guide
Page 47
Basic Installation for Local and Remote Monitoring
11.b.11.
Press [Connect] icon to connect your
PC and the video recording server. The video
appears on the WX-30 if success. Otherwise,
the [Warning] board will pop up and show you
failure message. For failure case, please press
[Connect] icon to check that the
connection setting is valid or not.
11.b.12. Press [Transmitter Setup] icon to show
 RX configuration menu.
11.b.13. Select [Connection] and press [Network
Settings] icon to configure
network setting.
11.b.14. For example :
Assign 210.17.139.5 to IP
Assign 210.17.139.1 to Gateway
Assign 202.14.67.4 to Primary DNS
Assign 202.14.67.14 to Secondary DNS
Enable sureLINK
Assign
“www.your_site.your_company.TeleEye.net
”
Note: The above network setting is an example.
Please consult you network administrator to get
your network setting information