User guide

 User Guide
Page 43
Basic Installation for Local and Remote Monitoring
11.a.4 Select [TCP/IP] option and press “Enter”
button
11.a.5 Select [IP] option and press “Enter” button.
IP address consists of four fields. Each field can
assign a number from 0 to 255.
11.a.6 Use “Left” or “Right” button to select
field and use “Up” or “Down” button to
set number. Set IP address (for example) to 210.17.139.5
11.a.7 Press “Enter” button to save the change and
return previous menu.
11.a.8 Follow the network setting and assign valid subnet
mask to [SUBNET MASK] and select [ENABLE
GATEWAY] option and input [GATEWAY]
option in similar way. Assign the Gateway (for
example) to 210.17.139.1
11.a.9 Select [ENABLE DNS] option Use “Left” or
“Right” button to select [YES] to enable DNS.
11.a.10 Assign the Primary DNS (for example) to 202.14.67.4
11.a.11 Assign the Secondary DNS (for example) to 202.14.67.14
11.a.12 Select [SURELINK] option from TCP/IP menu
and press “Enter” button to enter the sub menu.
11.a.13 Select [ENABLED] option and press “Left”
or “Right” button to set [YES] value
CONNECTION
TCP / IP …
MODEM …
THROUGHPUT
…
TCP / IP
IP 192.168.0.2
PORT 1024
SUBNET MASK 255.255.255.0
ENABLE GATEWAY NO
GATEWAY 0.0.0.0
ENABLE DNS NO
PRIMARY DNS 0.0.0.0
SECONDARY DNS 0.0.0.0
SURELINK
…
IP
IP : 210. 17.139. 5
TCP / IP
IP 210.17.139.5
PORT 1024
SUBNET MASK 255.255.255.0
ENABLE GATEWAY YES
GATEWAY 210.17.139.1
ENABLE DNS NO
PRIMARY DNS 0.0.0.0
SECONDARY DNS 0.0.0.0
SURELINK …
SURELINK
ENABLED YES
SURELINK ADDRESS www…..
REFRESH RATE 1 MINS