User guide

 User Guide
Page 36
Basic Installation for Local and Remote Monitoring
11.b.7.
Connect the PC Ethernet socket to the
video
recording server
Ethernet socket at rear panel of
the video recording server with cross-over
Ethernet cable. Check if the {LINK LED}
of the
video recording server is ON.
10/100 BASE-T
LINK COL
11.b.8. Run WX-
30 software which has been installed to
the PC. (For details of WX-
30 software
installation, please refer to WX-
30 Software
Guide)
11.b.9. Choose [Transmitter]  [Registration]
to
register the  RX
video recording
server. User needs to input
video recording
server serial number and registration code.
For example :
Serial No. : VTC12345
Registration Code : 1234567890
11.b.10. Press [Connect]
icon to pop up the
[Connect Window].
Type and select the
following setting :
For Broadband Connection :
Phone/IP : 192.168.0.2
Connect Using : TCP/IP Broadband
Password : 000000
OR
For Narrowband Connection :
Phone/IP : 192.168.0.2
Connect Using : TCP/IP Narrowband
Password : 000000
IP (192.168.0.2) and Password (000000)
If RX is set to advanced security mode, check