User guide

 User Guide
Page 29
Basic Installation for Local and Remote Monitoring
10/100 BASE-T
LINK COL
11.b.16. In Windows 2000/XP desktop, select Start >
Control Panel
11.b.17. Double click Network and Dial-up Connections
> right click Local Area Connections
and choose
Properties.
11.b.18. Choose Internet Protocol (TCP/IP) and click
Properties
11.b.19. Enter the IP address, subnet mask and Default
gateway for the PC to restore to its original
network configuration.
Note: The first 3 field of IP address should be
same as  RX video recording server
IP
and gateway address. IP address is
“210.17.139.146” and gateway address is
“210.17.139.1” in this example.
11.b.20. Click OK to apply the settings
12. Disconnect the  RX video recording server and current PC. Reconnect the video
recording server and current PC to the LAN network through straight-through Ethernet
cable.
13. Check Ethernet socket of both  RX video recording server and PC to ensure that
the {GREEN LINK LED} turns ON. Then connection diagram is shown as below:
RG59 cable
RG59 cable
Power Adapter
Ethernet
Socket
CCTV
Monitor
    RX
Cam eras
Network switch
210.17.139.145
210.17.139.146
210.17.139.147
Straight-through Ethernet cable