User guide

 User Guide
Page 27
Basic Installation for Local and Remote Monitoring
11.b.8. Run WX-30 software which has been installed to
the PC. (For details of WX-30 software
installation, please refer to WX-30 Software
Guide)
11.b.9. Choose [Transmitter]  [Registration] to
register the  RX video recording
server. User needs to input video recording server
serial number and registration code.
For example :
Serial No. : VTC12345
Registration Code : 1234567890
11.b.10. Press [Connect] icon to pop up the [Connect
Window]. Type and select the following setting :
Phone/IP : 192.168.0.2
Connect Using: TCP/IP LAN
Password: 000000
IP (192.168.0.2) and Password (000000) are
default setting of  RX
If RX is set to advanced security mode, check
Advanced security mode box and enter User
Name
11.b.11. Press [Connect] icon to connect your
PC to the video recording server. Live video is
shown on the WX-30 if success. Otherwise, the
[Warning] board will pop up and show you
failure message. For failure case, please press
[Connect] icon to check that the connection
setting is valid or not.