User guide

 User Guide
Page 14
Hard Disk Installation, Formatting and Scanning
C. Scan Disk
It is a hard disk maintenance function which is similar to Scan Disk function provided by the
Operating System of your personal computer.  RX video recording server provides
this function in an attempt to rescue the hard disk when errors are found, and to enhance its
performance and reliability.
Procedure
1. Press “Menu” button, select [SCAN/FORMAT
DISK] option and press “Enter” button to
enter [SCAN/FORAMT DISK] sub menu.
There is information about the hard disk. If not,
please check that the hard disk is installed
properly.
2. Select [SCANDISK] option press “Enter”
button.
3. Select [YES] option and press “Enter” button
to start the [SCANDISK] process.
Note :
Select [DEVICE] in main menu and press “Left” or “Right” button to set [RX-SE1]
option. Choose [SCAN DISK] and select [YES]. The RX-SE1 will be scanned.
MAIN MENU
SETUP . . .
FOOTAGE BACKUP . . .
SWITCH CONTROL . . .
SCAN / FORMAT DISK . . .
TRANSMITTER INFO . . .
LOCK KEYS . . .
USER LOG-IN/OUT . . .
SHUT DOWN ENTER
SCAN DISK
ALL RECORDING WILL STOP
DURING SCANDISK
SURE TO PROCEED ?
YES NO
SCAN / FORMAT DISK
DEVICE LOCAL
START TIME 22:35 20/06/06
END TIME 10:
07 15/11/06
MASTER MODEL NO XXX
MASTER SERIAL NO XXXX
MASTER CAPACITY 400GB
SLAVE MODEL NO N/A
SLAVE SERIAL NO
SLAVE CAPACITY
DISK USAGE 52%
SCAN DISK ENTER
FORMAT DISK ENTER