User guide
User
Guide
Page 13
Hard Disk Installation, Formatting and Scanning
Manual Formatting
It will be used if user wants to format the hard disk so as to have a clean recording space and
redeem the file allocation.
1.
Press “Menu” button, select
[SCAN/FORMAT DISK] option and press
“Enter” button to enter [SCAN/FORAMAT
DISK] sub menu.
2.
Select [FORMAT] option press “Enter”
button
3.
Select [YES] option and press “Enter” button
and [FORMAT DISK] board will pop up to
show about hard disk format processing status
4.
Press “Enter” button to restart video
recording server when [FORMAT FINISHED]
message board pops up.
Note :
Select [DEVICE] in scan/format disk menu and press “Left” or “Right” button to
set [RX-SE1] option. Choose [FORMAT DISK] and select [YES]. The RX-SE1 will be
formatted
MAIN MENU
SETUP . . .
FOOTAGE BACKUP . . .
SWITCH CONTROL . . .
SCAN / FORMAT DISK . . .
TRANSMITTER INFO . . .
LOCK KEYS . . .
USER LOG-IN/OUT . . .
SHUT DOWN ENTER
SCAN / FORMAT DISK
DEVICE LOCAL
START TIME 22:35 20/06/06
END TIME 10:
07 15/11/06
MASTER MODEL NO XXX
MASTER SERIAL NO XXXX
MASTER CAPACITY 400GB
SLAVE MODEL NO N/A
SLAVE SERIAL NO
SLAVE CAPACITY
DISK USAGE 52%
SCAN DISK ENTER
FORMAT DISK ENTER
FORMAT DISK
ALL DATA IN DISK
WILL BE ERASED ,
SURE TO PROCEED ?
YES NO
FORMAT
FORMAT FINISHED ,
SYSTEM WILL RESTART NOW
OK