User guide

 RX User Guide
Page 169
Audit Trial Log Description
APPENDIX G
Audit Trial Log Description
A. Audit Trial Log Description of Setting Log and
Operation Log
Event short form : [EVENT]
ARM : arm / disarm input
SECUSW : security switch input
ALARM : alarm sensor input
MOTION : motion
VLOSS : video loss
SYSTMR : system tamper input
PWRFAL : power failure input
HDD : disk usage
HI TMP : overheat
B. Setting Log Operation Column Table :
OPERATION DESCRIPTION
CAMERA Install/uninstall camera
CAMERA NAME Change camera name
PTZ CAMERA Support / unsupported PTZ camera
PTZ PAN SPEED Change PTZ camera pan speed
PTZ TILT SPEED Change PTZ camera tilt speed
PTZ PAN DUR Change PTZ camera pan duration
PTZ TILT DUR Change PTZ camera tilt duration
PTZ ZOOM DUR Change PTZ camera zoom duration
PTZ FOCUS DUR Change PTZ camera focus duration
PTZ IRIS DUR Change PTZ camera iris duration
PTZ ADDI DUR Change PTZ camera additional duration
PTZ WASHER DUR Change PTZ camera washer duration
PTZ WIPER DUR Change PTZ camera wiper duration
PTZ PTL SPEED Change PTZ camera patrol speed
PTZ DWELL TIME Change PTZ camera dwell time
PTZ DRIVER Change PTZ driver
PTZ BAUD RATE Change PTZ camera baud rate
CLOCK POSITION Change OSD clock position
CAM NAME POSN Change OSD camera name position
SEQ SW TIME Change camera sequential switch time
SEQ MODE CAM Change camera in sequential display mode
DISPLAY MODE Change default display mode
OSD COLOR Change OSD menu color
VIDEO FORMAT Change camera video format