User guide
RX
User
Guide
Page 164
Firmware upgrade
APPENDIX D
Firmware Upgrade
Please follow the following procedures to upgrade the new version of RX firmware.
Note that user must upgrade the new version of RX firmware TWICE if the current
version firmware is below 2.00.00 version.
USB Upgrade :
Step 1 :
If you already have the firmware upgrade file in a USB, please go to Step 3.
Otherwise, please go to Step 2.
Step 2 :
Get ready the RX firmware upgrade file *.rxp.
Get ready an empty USB drive and download the RX firmware upgrade file to
your USB root directory, for example, E:\*.rxp.
Step 3 :
Turn on RX video recording server. Plug the USB flash into USB port in the
rear panel of RX video recording server. Press Menu button at the front panel
of the video recording server.
Enter Main menu Setup menu Transmitter menu Upgrade menu
Upgrade Transmitter Firmware Choose Upgrade from USB and press Enter
button.
The video recording server will complete the upgrade process automatically.
Step 4 :
After upgrade, press Menu button at the front panel of the video recording
server.
Enter Main menu Transmitter Info menu, to check the RX firmware version
is upgraded or not.
CD Upgrade :
Step 1 :
If you already have the firmware upgrade file in a CD, please go to Step 3.
Otherwise, please go to Step 2.
Step 2 :
Prepare a blank CDR.
Burn the RX firmware upgrade file into the root directory of the blank CDR,
for example, F:\*.rxp. (For burning the RX firmware upgrade file into the
CDR, please refer to the user guide of the software for burning CDR.)
Step 3 :
Install a RX formatted hard disk into RX video recording server and turn it
on. Insert the CD into the CD-ROM of RX video recording server. Press Menu
button at the front panel of the video recording server.
Enter Main menu Setup menu Transmitter menu Upgrade menu
Upgrade Transmitter Firmware Choose Upgrade from CD and press Enter
button.
The video recording server will complete the upgrade process automatically.
Step 4 :
After upgraded, press Menu button at the front panel of the video recording
server.
Enter Main menu Transmitter Info menu, to check the RX firmware version
is upgraded or not.