User guide

  Eye RX User Guide
Page 152
RX-SE setting
M. RX-SE setting
1. Setup RX-SE and press “Menu” button.
Select [SETUP] option and press “Enter”
button to enter [SETUP] sub menu. Choose
RX-SE and press “Enter” button.
2. Select [RX-SE] option and press “Enter”
button to enter the RX-SE setting menu. You
can choose different RX-SE number in this
setup menu.
3. Select [ENABLE] option and Use “Left”
or “Right” button to select [YES] for
enable RX-SE setting.
Note:
IP and PORT is the IP address and port number of
the RX-SE. IP, PORT and PASSWORD can change
here. It will find the RX-SE by this IP address and port
number.
SETUP RX
-
SE
RX-SE 1 . . .
RX-SE 2 . . .
RX
-
SE 1 SETTING
ENABLE YES
IP 192.XXX.X.X
PORT 1025
PASSWORD ******
TEST ENTER
STATUS CONNECTED
SERIAL NO XXXXX
VERSION XXXXX
CONFIGURE . . .
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
PASSWORD . . .
USER ACCOUNT . . .
RX-SE . . .
SETTING IMPORT/EXPORT . . .