User guide

  Eye RX User Guide
Page 149
Time Synchronization
K. Time Synchronization
1. Press “Menu” button, select [SETUP]
option and press “Enter” button to enter
[SETUP] sub menu. Select [DATE/TIME]
option and press “Enter” button.
2. Select [ENABLED] and set [YES] to enable
dial back action. Select [DNS] and press
“Enter” to set DNS setting. Select [PRI
TIME SERVER] and press “Enter” to set
the primary time server address and [SEC
TIME SERVER] to set the secondary time
server address.
3. Select [UPDATE DATE / TIME] and press
“Enter” to update the date and time with
the above setting and the botton line
 “STATUS” indicates the results
 “SUCCESS” means successful update
 “WORK-IN-PROGRESS” means it is
trying to update
 “CANNOT RESOLVE DNS” means
unsuccessful update and user should check
the setting of time server and DNS setting.
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
PASSWORD . . .
USER ACCOUNT . . .
RX-SE . . .
SETTING IMPORT/EXPORT . . .
RESTORE FACTORY SETTINGS ENTER
DATE / TIME
TIME SYNC ENABLED YES
TIME ZONE . . .
DATE 11 MAR 2006
TIME 11 : 03
PRI TIME SERVER TIME . WIND . .
SEC TIME SERVER TIME . N IST . .
DNS SETTING . . .
UPDATE DATE / TIME ENTER
STATUS
SUCCESS