User guide

 User Guide
Page 10
Hard Disk Installation, Formatting and Scanning
Installation Procedure
RX MUST be shut down before installing / uninstalling hard disk
1. Press “Menu” button, select [SHUT DOWN] option and press “Enter” button.
2. [SHUT DOWN] menu will pop up and select [SHUT DOWN] option and press “Enter”
button.
3. Select [YES] and press “Enter” button to confirm the shut down and wait for the message
[IT IS NOW SAFE TO TURN OFF RX].
4. Pull the active-handle outwards. Then use the
bundled key provided and insert into the
keyhole. Turn the key anti-clockwise (position
C), then you can pull out the handle.
5. Pull the handle outwards to remove the carrier
body away from the cartridge frame.
6. Push the release latch to slide the top cover
backwards and remove.
7. Insert the DC power
cable and IDE cable on the
HDD