User guide

 User Guide
Page 137
Event Action
10. Spot alarm
Spot alarm displays real time live video of pre-selected camera when event triggered, so
operator can immediately know what is happening at the site. If more than one associated
camera is selected, Spot alarm will change to switch mode.
Spot alarm setup procedure
1. In the action menu, select [SPOT ALARM]
option
and press “Enter” button to enter the live
camera action setting menu.
2. Select [ENABLED] option and use “Left” or
“Right” button to enable (i.e. set the value to
[YES]) live camera action.
3. Select [ASSOCAITE CAMERA]
option and press
“Enter” button to enter the live camera action
setting menu. Use the “Left” or “Right”
button to select camera and press the “Up” or
“Down” button to enable or disable camera.
Press “Enter” button to save the camera setting
and go back to live camera action menu.
4. You can press “Live” button to exit OSD menu
or press “Back” button to enter action menu
again.
XXXXXX X
SPOT ALARM
ENABLED YES
ASSOICATE CAMERA - - - -
ASSOCIATE CAMERAS
1 - 3 -
XXXXXXX ACTION
RECORDING …
SWITCH …
DIALBACK …
EMAIL …
SMS …
BUZZER …
EVENT LED …
LIVE CAMERA …
PTZ …
SPOT ALARM …