User guide

 User Guide
Page 130
Event Action
13. Press the icon to select the connection
type for dialback
14. Press the icon to enter [Connection
Speed] message broad to select bit rate, port
number. The port number should be as same
as the port number set in step 8
15. Press [OK] icon to exit and save the settings
4. Email
Email action supports user to send emails to recipient addresses in order to notice the event
trigger status.
Email Setup Procedure :
1. Press “Menu” button, select [SETUP]
option and press “Enter” button to enter
[SETUP] sub menu.
2. Select [EVENT HANDLER] option and
press “Enter” button. Select an action and
press “Enter” button to show event setting
menu. Select [ACTION] option and press
“Enter” button, then select [E-MAIL]
option and press “Enter” button to enter
email setting menu.
3. Select [ENABLED] and set [YES] to enable
email action. Select [GENERAL E-MAIL
SETTING] option and press “Enter”
button to select other email action settings.
XXXXX E
-
MAI L
ENABLED YES
GENERAL E-MAIL SETTING . . .
XXXXXXX ACTION
RECORDING …
SWITCH …
DIALBACK
…
EMAIL …
SMS …
BUZZER …
EVENT LED …
LIVE CAMERA …
PTZ …
SPOT ALARM …