User guide

 User Guide
Page 126
Event Action
Switch Action Setup Procedure
1. In the action menu, select [SWITCH]
option and
press “Enter” button to enter the switch
action setting menu.
2. Select [ENABLED] option and use “Left”
or “Right” button to enable (i.e. set the
value to [YES]) switch action.
3. Select [SWITCHES ENABLED] option and
press “Enter” button to enable or disable the
switches.
4. Use the “Left” or “Right” button to
select switch and press the “Up” or “Down”
button to enable or disable switch.
5. Press “Enter” button to save the selection
setting and go back to switch action menu.
6. Select [GENERAL SWITCH SETTING]
option and press “Enter” button to enter the
switch setting menu.
7. Select [SWITCH (No.)] option and press
“Enter” button to enter the switch (No.)
setting menu.
8. Select [NAME] option and press “Enter”
button to edit the name of switch (No.).
9. Select [TYPE] option and press the “Left”
or “Right”
button to choose the switch type.
Press the “Back” button to go back the
general switch setting menu and save the setting.
XXXXXXX SWITCH
ENABLED YES
SWITCHES ENABLED - - - -
GENERAL SWITCH SETTING . . .
ASSOCIATE SWITCH
1 - 3 -
GENERAL SWITCH SETTING
SWITCH 1 . . .
SWITCH 2 . . .
SWITCH 3 . . .
SWITCH 4 . . .
LATCH DURATION 10 SEC
ACTION DELAY 10 SEC
SWITCH X SETTING
NAME SWITCH X
TYPE LATCHING
XXXXXXX ACTION
RECORDING …
SWITCH …
DIALBACK …
EMAIL …
SMS …
BUZZER …
EVENT LED …
LIVE CAMERA …
PTZ …
SPOT ALARM …