User guide

 User Guide
Page 121
Event Handling
8. Disk Usage
Disk usage event will be triggered if hard disk usage exceeds user specified warning level. The
warning level consists of 6 levels : 50%, 60%, 70%, 80%, 90% and 100%. If the hard disk usage
achieves the warning level, the disk usage event will be triggered.
Disk Usage Event Setup Procedure :
1. Press “Menu” button, select [SETUP]
option and press “Enter” button to enter
[SETUP] sub menu. Select [EVENT
HANDLER] option and press “Enter”
button. Select [DISK USAGE] option and
press “Enter” button to show disk usage
setting menu.
2. Select [ENABLED] and set [YES] to enable
disk usage event. Select [WARNING LEVEL]
to choose the suitable disk usage warning level.
Select [ACTION] option and press “Enter”
button to select disk usage action.
9. Overheat
Overheat event will be triggered if video recording server gets overheat.
Overheat Event Setup Procedure :
1. Press “Menu” button, select [SETUP]
option and press “Enter” button to enter
[SETUP] sub menu. Select [EVENT
HANDLER] option and press “Enter”
button. Select [OVERHEAT] option and
press “Enter” button to show overheat
setting menu.
2. Select [ENABLED] and set [YES] to
enable overheat event. Select [ACTION]
option and press “Enter” button to
select overheat action.
EVENT
HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . .
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
DISK USAGE . . .
OVERHEAT . . .
HDD AVAILABLE …
DISK US
AGE EVENT
ENABLED YES
WARNING LEVEL 50%
ACTION . . .
EVENT HAN
DLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . .
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
DISK USAGE . . .
OVERHEAT . . .
HDD AVAILABLE …
OVERHEAT
ENABLED YES
ACTION . . .