User guide

 User Guide
Page 120
Event Handling
Power Failure Setup Procedure
1. Press “Menu” button, select [SETUP] option
and press “Enter” button to enter [SETUP]
sub menu. Select [EVENT HANDLER] option
and press “Enter” button.
2. Select [POWER FAILURE] option and press
“Enter” button to enter the power failure
setting menu.
3. Select [ENABLED] option and use “Left”
or “Right” button to enable (i.e. set the
value to [YES]) power failure event handler.
4. Select [SENSOR TYPE] option and use “Left”
or “Right” button to choose sensor
type according to the configuration of
 RX power failure control circuit type
5. Select [ACTION] option and press “Enter”
button to select power failure action. (For action,
please refer to Event Action Part in Advance
Operation Section of User Guide)
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
PASSWORD . . .
USER ACCOUNT . . .
RX-SE . . .
SETTING IMPORT/EXPORT . . .
RESTORE FACTORY SETTING
ENTER
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . ..
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
DISK USAGE . . .
OVERHEAT . . .
HDD AVAILABLE …
POWER FAILURE
ENABLED YES
SENSOR TYPE NO
ACTION …
POWER FAILURE
ENABLED YES
SENSOR TYPE NC
ACTION …
POWER FAILURE
ENABLED YES
SENSOR TYPE NC
ACTION …