User guide

 User Guide
Page 118
Event Handling
6. System Tamper
System Tamper Input
It is an input to the video recording server for wiring a tamper switch of the external cabinet
outside the video recording server and its accessories. The purpose of system tamper event is to
prevent someone to break into the cabinet and destroy the video recording server.
Sensor Type
The system tamper input circuit type is normal close (NC). When the state of the circuit is
closed, it indicates normal of  RX. Otherwise, when the state of the circuit is opened,
it indicates system tamper of  RX. The system tamper input circuit type is normal
open (NO). When the state of the circuit is opened, it indicates normal of  RX.
Otherwise, when the state of the circuit is close, it indicates system tamper of  RX.
Physical Configuration for System Tamper
The system tamper input and ground of  RX video recording server need to connect
to an external cabinet which is used for protecting the video recording server and its accessories
System Tamper Input
External cabinet
Ground
System Tamper Setup Procedure
1. Press “Menu” button, select [SETUP]
option
and press “Enter” button to enter [SETUP]
sub menu. Select [EVENT HANDLER] option
and press “Enter” button.
2. Select [SYSTEM TAMPER] option and press
“Enter” button to show the system tamper
menu and press “Enter” button to enter the
System Tamper setting menu.
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
PASSWORD . . .
USER ACCOUNT . . .
RX-SE . . .
SETTING IMPORT/EXPORT . . .
RESTORE FACTORY SETTING ENTER
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . ..
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
DISK USAGE . . .
OVERHEAT . . .
HDD AVAILABLE
…