User guide

 User Guide
Page 117
Event Handling
5. Video Loss
Video Loss
Video loss can be triggered when the video channel input disappears and happens if the video
recording server receives no signal from the camera. The local CCTV monitor displays a blue
screen for video loss condition.
Video Loss Setup Procedure
1. Press “Menu” button, select [SETUP] option
and press “Enter” button to enter [SETUP]
sub
menu. Select [EVENT HANDLER] option and
press “Enter” button.
2. Select [VIDEO LOSS] option and press “Enter”
button to show the camera selection menu.
Select a camera and press “Enter” button to
enter the video loss setting menu.
3. Select [ENABLED] option and use “Left” or
“Right” button to enable (i.e. set the value to
[YES]) video loss event handler.
4. Select [ACTION] option and press “Enter”
button to select alarm trigger or tamper action. (For
action, please refer to Event Action Part in
Advance Operation Section of User Guide)
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
PASSWORD . . .
USER ACCOUNT . . .
RX-SE . . .
SETTING IMPORT/EXPORT . . .
RESTORE FACTORY SETTING ENTER
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . ..
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
DISK USAGE . . .
OVERHEAT . . .
HDD AVAILABLE …
VIDEO LOSS X SETTING
ENABLED YES
ACTION …
VIDEO LOSS X SETTING
ENABLED YES
ACTION …