User guide

 User Guide
Page 116
Event Handling
2. Select [MOTION] option and press “Enter”
button to show the motion selection menu. Select
motion and press “Enter” button to enter the
motion setting menu.
3. Enable the motion setting. Select [MOTION
DETECTIOR SETTING] option and press
“Enter” button to setup motion detection
setting.
4. Setting motion detection as follow:
DESELECT : deselect motion area
SELECT : select motion area
DESELECT ALL : clear all motion block
SELECT ALL : select all motion block
RESTORE : restore previous motion
setting
SENS : sensitivity option : LOW,
MID, HIGH, CUSTOM
LEVEL : customize level sensitivity
AREA : customize spatial sensitivity
OK : finish, save the setting and
exit the detection menu
*Note: option position will be different in RX368_V2 /
RX3616_V2
5. Select [ACTION] option and press “Enter”
button to select alarm trigger or tamper action.
(For action, please refer to Event Action Part in
Advance Operation Section of User Guide)
Deselected Area Selected Area
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . ..
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
DISK USAGE . . .
OVERHEAT . . .
HDD AVAILABLE …
MOTION 1 SETTING
ENABLED NO
MOTION DETECTOR SETTING …
ACTION …
MOTION 1 SETTING
ENABLED NO
MOTION DETECTOR SETTING …
ACTION …