User guide

 User Guide
Page 113
Event Handling
Physical Configuration for Alarm
The alarm input and ground of  RX video recording server need to connect to
various kinds of sensors which are commonly installed at entrance or special part of the
surveillance area.
Alarm Setup Procedure
1. Press “Menu” button, select [SETUP] option
and press “Enter” button to enter [SETUP]
sub menu. Select [EVENT HANDLER] option
and press “Enter” button.
2. Select [ALARM] option and press “Enter”
button to show the alarm selection menu. Select
appropriate alarm and press “Enter” button
to enter the alarm setting menu.
3. Select [ENABLED] option and use “Left”
or “Right” button to enable (i.e. set the
value to [YES]) alarm.
4. Select [SENSOR TYPE] option and use “Left”
or “Right” button to choose sensor
type according to the configuration of
 RX alarm sensor control circuit type.
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
PASSWORD . . .
USER ACCOUNT . . .
RX-SE . . .
SETTING IMPORT/EXPORT . . .
RESTORE FACTORY SETTING ENTER
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . .
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
DISK USAGE . . .
OVERHEAT . . .
HDD AVAILABLE
…
ALARM 1 SETTING
ENABLED YES
SENSOR NAME ALARM 1
SENSOR TYPE NO
SENSOR TAMPER TYPE NONE
ZONE TYPE NORMAL
ENTRY DELAY 0 SEC
EXIT DELAY 0 SEC
ACTION …
ALARM 1 SETTING
ENABLED YES
SENSOR NAME ALARM 1
SENSOR TYPE NC
SENSOR TAMPER TYPE NONE
ZONE TYPE NORMAL
ENTRY DELAY 0 SEC
EXIT DELAY 0 SEC
ACTION
…