User guide

 User Guide
Page 105
Event Handling
Security Switch Setup Procedure
1. Press “Menu” button, select [SETUP] option
and press “Enter” button to enter [SETUP]
sub
menu. Select [EVENT HANDLER] option and
press “Enter” button.
2. Select [SECURITY SWITCH] option and press
“Enter” button to show security switch setting
menu.
3. Select [ENABLED] option and use “Left” or
“Right” button to enable (i.e. set the value to
[YES]) the security switch function.
4. Select [ON STATE] option and use “Left” or
“Right” button to choose on state according
to the configuration of  RX security
switch control circuit type.
5. Select [TAMPER TYPE] option and use “Left”
or “Right” button to choose security
switch tamper circuit type according to the
configuration of  RX security switch
tamper circuit type.
S
ETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
PASSWORD . . .
USER ACCOUNT . . .
RX-SE . . .
SETTING IMPORT/EXPORT . . .
RESTORE FACTORY SETTING ENTER
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . .
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
DISK USAGE . . .
OVERHEAT . . .
HDD AVAILABLE
…
SECURITY SWITCH
ENABLED YES
ON STATE OPEN
TAMPER TYPE NONE
ASSOCIATE SWITCH NO
TAMPER EVENT ACTION …
SECURITY SWITCH
ENABLED YES
ON STATE CLOSE
TAMPER TYPE NONE
ASSOCIATE SWITCH NO
TAMPER EVENT ACTION …
SECURITY SWITCH
ENABLED YES
ON STATE CLOSE
TAMPER TYPE DEOL
ASSOCIATE SWITCH NO
TAMPER EVENT ACTION …