User guide

 User Guide
Page 103
Event Handling
Arm/Disarm Setup Procedure
1. Press “Menu” button, select [SETUP] option
and press “Enter” button to enter [SETUP]
sub-menu. Select [EVENT HANDLER] option
and press “Enter” button.
2. Select [ARM/DISARM] option and press “Enter”
button to show arm/disarm setting menu.
3. Select [ENABLED] option and use “Left” or
“Right” button to enable (i.e. set the value to
[YES]) the arm/disarm function.
4. Select [ARM STATE] option and use “Left”
or “Right” button to choose arm state
according to the configuration of  RX
arm/disarm control circuit type.
5. Select [TAMPER TYPE] option and use “Left”
or “Right” button to choose arm/disarm
tamper circuit type according to the configuration
of  RX arm/disarm tamper circuit type.
SETUP MENU
VIDEO . . .
RECORDING . . .
SWITCHES . . .
DATE / TIME . . .
CONNECTION . . .
EVENT HANDLER . . .
TRANSMITTER . . .
PASSWORD . . .
USER ACCOUNT . . .
RX-SE . . .
SETTING IMPORT/EXPORT . . .
RESTORE FACTORY SETTING
ENTER
EVENT HANDLER
ARM / DISARM . . .
SECURITY SWITCH . . .
ALARM . . .
MOTION . . .
VIDEO LOSS . . .
SYSTEM TAMPER . . .
POWER FAILURE . . .
DISK USAGE . . .
OVERHEAT . . .
HDD AVAILABLE
…
ARM / DISARM
ENABLED YES
ARM STATE CLOSE
TAMPER TYPE NONE
ASSOCIATE SWITCH NO
TAMPER EVENT ACTION …
ARM / DISARM
ENABLED YES
ARM STATE CLOSE
TAMPER TYPE NONE
ASSOCIATE SWITCH NO
TAMPER EVENT ACTION …
A
RM / DISARM
ENABLED YES
ARM STATE CLOSE
TAMPER TYPE DEOL
ASSOCIATE SWITCH NO
TAMPER EVENT ACTION …