User guide

 User Guide
Page 100
Install  RX with Tamper Circuit and External Resistors
Resistance ()
Condition 0~400 401~2780 2781~29.5k 29.5k~Infinity
DEOL (Normal Close) Tamper Short Normal (Close) Alarm (Open) Tamper Open
DEOL (Normal Open) Tamper Short Alarm (Close) Normal (Open) Tamper Open
SEOL (Normal Close) Tamper Short Normal (Close) Alarm (N/A) Alarm (Open)
SEOL (Normal Open) Alarm (Close) Normal (Open) Alarm (N/A) Tamper Open
NC without tamper Normal (Close) Alarm (N/A) Alarm (N/A) Alarm (Open)
NO without tamper Alarm (Close) Alarm (N/A) Alarm (N/A) Normal (Open)
Alarm (N/A): Alarm is not applicable.
C. Throughput Control
Throughput control function can limit the video recording server output data rate.
Throughput Control Setup Procedure
1. Press “Menu” button, select [SETUP]
option and press “Enter” button to enter
[SETUP] sub menu. Select [CONNECTION]
option and press “Enter” button to show
connection setting menu. Select
[THROUGHPUT] option to enter the
throughput control menu.
2. Choose [LAN STREAM], [BROADBAND
STREAM] and [NARROWBAND
STREAM] to select the data rate of respective
connection.
THROUGHPUT
LAN STREAM 100M BPS
BROADBAND STREAM 40M BPS
NARROWBAND STREAM 128K BPS
BPS : BIT PER SECOND
CONNECTION
TCP / IP . . .
MODEM . . .
THROUGHPUT . . .