Specifications

Page 3

Locator Keypad Controls

▼ Preset Number Rotary Switches– Used to assign

a distributed Location Preset to each the keypad.

▼

Zoom (IN/OUT)- Used to adjust the

tightness of the camera view.

▼

PAN/TILT- Used to

control the camera’s

up/down, and left/right

movement.

▼ Base Unit Address Rotary Switch– Selects

which CameraMan Camera the keypad will

control.

▼

Image (Bright/Dark)- Used to adjust the

brighteness of the picture.

▼

autoIMAGE- Used to enable the camera to

automatically adjust the image setting to

compensate for varying light levels.

▼

FOCUS (3-CCD Keypads only)- Used to adjust

the focal point of the camera.

Note: 1-CCD cameras are auto-focus, so the

keypads do not have manual focus buttons.

▼ Battery Compartment– Takes two N-Size batteries with

a lifespan of four to six months with average use.

Note: The keypad will indicate that the battery is

low with a three second continuous beep when any

of the buttons are pressed. At that time, the

batteries should be replaced.