Specifications

Page 5
Meet Your 1-CCD Presenter Camera System
Tracking System Keypad
Next, take a look at the front of your Tracking System Keypad. It is the control center for your Presenter Camera System and
contains the following features.
V
LOCATION PRESET SELECT – Used
to recall preset locations.
V
autoTRACK VIEWS – Used to change
the position and perspective of the
presenter in the video frame while
being tracked by the camera (choose
between Tight, Wide, Right, and
Left)
V
ZOOM IN/OUT – Used to tighten
and widen the camera’s view.
V
TRACKING FREEZE
–
Used to disengage
autoTRACK, and freeze the camera’s
movement.
V
SETUP
–
Used in conjunction with other
controls for advanced functions.
V
IMAGE CONTROLS
–
Used to open and
close the iris.
V
autoIMAGE – Used to allow the camera to
automatically adjust the brightness and
darkness for each video picture.
V
PAN/TILT – Used to Controls the
camera’sup/down, and left/right
movement.
Use of the PAN/TILT arrow buttons
will disengage the autoTRACK mode.
V
Indicator LED
–
indicates Keypad is in
operation.
V
SUBJECT POSITION CONTROLS
–
Used
to fine-tune the position of the subject
while in autoTRACK mode.
V
FOCUS
–
Used to
manually adjust visual
clarity of the video
picture. Used with
SETUP button to
increase and decrease
Gain.
V
autoFOCUS
–
Used to
allow the camera to
automatically adjust the
visual clarity of the video
picture.