Specifications

Page 22
CameraMan
®
1-CCD Presenter Camera System Installation and Operations Manual
Controlling the Zoom, Focus and IMAGE
Focus Setting
The Focus setting adjusts the lens for visual clarity of the video
picture.
Manual Setting
Pressing either FOCUS button puts the camera into manual
Focus mode.
To Manually Control Focus:
• Press the top FOCUS button to adjust the lens for objects closer to the
camera.
• Press the bottom FOCUS button to adjust the lens for objects further
from the camera.
The FOCUS setting can be used for Location Presets and
autoTRACK Views.
Automatic Setting
In this mode, CameraMan will adjust the Focus for each camera view
automatically.
• Press autoFOCUS to enable automatic operation of the
CameraMan’s FOCUS function.
For example, you may want to use the Manual Focus setting
when you are not fully-satisfied that the video image is as clear
as it can be. Otherwise, the Focus setting will adjust itself to
each and every camera view automatically.
Zoom Perspective
• Press Zoom IN for the camera to zoom in for a tighter view.
• Press Zoom OUT for the camera to zoom out for a wider
view.
The Zoom can be adjusted manually and can be
stored in a Location Preset or autoTRACK View.
Image Settings
The IMAGE setting adjusts the picture brightness in the video frame.
Manual Setting
By pressing either IMAGE button, the camera's image control
automatically becomes a manual adjustment.
To Manually Control Image:
• Press the top IMAGE button to open the iris.
• Press the bottom IMAGE button to close the iris.
The image can be adjusted manually and can be stored in a
Location Preset or an autoTRACK View (Dip Switch 5 on Bank B
of the camera base unit must be DOWN).
For example, you may want to use the manual image setting when
you are not fully-satisfied that the video image is as dark or light as
it should be. Otherwise, the image setting will adjust itself
automatically to the lighting conditions in all areas of the room.
Automatic Setting
In this mode, CameraMan will adjust the image (light & dark) for each camera
view automatically.
• Press autoIMAGE to enable automatic operation of the
CameraMan’s
Image function.
The autoIMAGE can be stored in a Location Preset
or autoTRACK View.
These control features help ensure that your video looks great whether you control the image or let the camera do it
automatically.