Specifications

Page 14
CameraMan
®
1-CCD Presenter Camera System Installation and Operations Manual
System Start Up
Optional Auxiliary Battery Pack
An optional Rechargeable Auxiliary Battery Pack is available to connect with the Tracking Ring
Power Pack for extra long use. When attached to the Tracking Ring Power Pack, the Auxiliary
Battery Pack overrides the built-in 12-hour Battery. If more than 4 hours of use is required, then
connect the Auxiliary Battery Pack to the Tracking Ring Power Pack. This provides up to twenty-
four additional hours of use.
To recharge the Auxiliary Battery Pack:
1. Turn OFF the Tracking Ring Power Pack.
2. Set the switch on the front of the Battery Charger to AUXILIARY BATTERY PACK.
3. Plug the Battery Charger into an electrical outlet and connect the Auxiliary Battery Pack to
the charger.
To get the maximum hours of use, utilize the 12 hour built-in battery first until the
Battery LOW LED illuminates, then attach the Auxiliary Battery Pack for an additional
24 hours, giving you a total of 36 hours of use.
Once the BATTERY LOW LED illuminates, recharge the Tracking Power Pack before the
next use. The Battery Charger takes 4 – 6 hours to recharge the Auxiliary Battery
Pack.
Audio Switch
To activate Audio:
1. Set the AUDIO switch on the top of the Tracking Ring Power Pack to ON.
2. Speak at a normal level.
If you decide not to use the Audio feature of the Tracking Ring Package, the AUDIO switch on
the top of the Tracking Ring Power Pack should be set to OFF.
Auxiliary Battery Pack plugged into Power
Pack and mounted on Tracking Ring Power
Pack Belt
Auxiliary
Battery Pack
switch on
battery
charger
Top view of Power Pack illustrating audio
switch and ON LED