Specifications

IV. SPECIFICATIONS 24
Shutt
er
Flash
Drive System
LCD Monitor
Image Playback
Image Protection
and Erase
Menus
T
ype:
V
ertical-travel, mechanical, focal-plane shutter with all speeds electronically-controlled
Shutt
er Speeds:
1/8000 t
o 30 sec. (1/3-stop increments), bulb, X-sync at 1/250 sec.
Shutt
er Release:
Sof
t-touch electromagnetic release
Noi
se Reduction:
Sett
able with C.Fn-02 (Noise reduction for long exposures)
Self
-Timer:
10-
sec. delay
R
emote Control:
R
emote Control with Remote Switch RS-80N3, Timer Remote Controller
T
C-80N3 or Wireless Controller LC-4
Built-in Flash: Type: Auto pop-up, retractable, built-in flash in the pentaprism.
Guide No: 13/43 (at ISO 100 in meters/feet), Recycling time: Approx. 3 sec., Flash ready
indicator: Flash-ready icon lights on in viewfinder.
Flash Coverage: Up to 17mm focal length (equivalent to approx. 28mm in 35mm format)
EOS-dedicated Speedlite: E-TTL II auto flash with EX-series Speedlite. PC Terminal
provided, not sensitive to PC card polarity; maximum sync line voltage 250 volts
Drive Modes: Single, Continuous, Self-Timer
Continuous Shooting Speed: Approx. 5 fps (at 1/250 sec. or faster for all recording qualities)
Max. Burst During Continuous Shooting: 23 shots (JPEG Large/Fine)/6 shots (RAW)
Type: TFT color LCD monitor
Monitor Size: 1.8 inches
Pixels: Approx. 118,000 pixels (Displayed pixels)
Coverage: Approx. 100% (for JPEG images)
Brightness Adjustment: 5-levels (settable with menu’s “LCD brightness”)
Image Display Format: (1) Single image, (2) Single image with information, (3) 9-image
index, (4) Magnified Zoom (single image) up to 10x, (5) Auto play
Highlight Alert: In the single image with information display mode, the highlight
por
tions containing no image information will blink
Protection: A single image can be protected or unprotected
Erase: A single image or all images stored in a CompactFlash card can be erased if they
are unprotected
Menu Categories: (1) Shooting Menus [8], (2) Playback Menus [4], (3) Setup Menus [14]
LCD Monitor Language: English, German, French, Dutch, Danish, Finnish, Italian,
Norwegian, Swedish, Spanish, Chinese (simplified), and Japanese
Firmware Updating: Enabled by the user via file copied onto CF card