User manual

17
Settings
Display Rev = Rotation of the display
by 180°
Display Rev On Rotation of the display by 180° (e.g. overhead installation)
Display Rev Off Normal display
Display = automatic display
switch-off
Display On = permanently on
Display Off = automatic switch-off of the display after 1 minute of inactivity.
DMXFail = Operating status with
DMX signal interruption
Hold = last command is held
Blackout = activates Blackout
Dim.Curve = Dimmer Curve Linear = The light intensity increases linearly with the DMX value.
Exp = Adjustment of the light intensity is finer in the lower DMX value
range and coarser in the upper DMX value range.
Log = Adjustment of the light intensity is coarser in the lower DMX
value range and finer in the upper DMX value range.
S-Curve = Adjustment of the light intensity is finer in the lower and upper
DMX value ranges and coarser in the middle DMX value range.
Dimmer Resp. = Dimmer response LED = The spotlight responds abruptly to changes in the DMX value.
Halogen = The spot behaves in a manner similar to that of a halogen lamp
with gentle changes in brightness.
White Balance = White balance Red, Green, Blue, White = Individual white balance. Cross-operating mode setting of the 4
RGBW LED groups
IR Remote = enables control via
IR remote control or
switch off
On = enables control via IR remote control
Off = disables control via IR remote control
Factory Reset = Reset to factory
settings
Reset Now? ENTER = Reset to factory setting
MODE = do not perform reset
ENTER
UP/DOWN
ENTER
UP/DOWN
/
ENTER
ENTER
/
/
ENTER
UP/DOWN
/
ENTER
ENTER
/
/
ENTER
UP/DOWN
/
ENTER
UP/DOWN
/
ENTER ENTER
/
ENTER
UP/DOWN
/
ENTER ENTER
/
/
ENTER
UP/DOWN
/
ENTER ENTER
/
/
ENTER
UP/DOWN
/
ENTER
ENTER
/
/
ENTER
ENTER = Yes /
MODE = No
/
ENTER
/
ENTER
/
ENTER
/ /
ENTER
/
UP/ DOWN -ENTER UP/ DOWN -ENTER UP/ DOWN -ENTER UP/ DOWN -ENTE
/
ENTER
ENTER
/