Users Manual Part 1

35
DMX
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
OMEGA BRACKET
The Omega double bracket is included in the spotlight's scope of delivery.
HAZARD: Overhead mounting requires extensive experience, including the
calculation of the load limit values of the installation material and regular safety
inspection of all installation materials and spotlights. If you do not have these
qualifications, do not attempt to perform an installation yourself. Refer instead to a
qualified professional.
There is a risk that devices that are incorrectly mounted and
secured may come loose and fall down. This can cause serious injury or death.
Truss installation: First mount two suitable truss clamps (optionally available)
on the left and right of the Omega bracket (Fig. A) and then both together on the
spotlight (Fig. B). Turn the four locking levers clockwise about a quarter turn until they stop. Make
sure that all connections are secure and then fasten the spotlight to the side handle recesses with
a suitable safety cable (Fig. C).
- Similar to image -
A
B
B
A
C
C
The Omega double bracket also serves as a mounting base for the optionally available centre
yoke and V-mount adapter accessories (see OPTIONAL ACCESSORIES).