Users Manual Part 1

29
DMX
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
Colour
Calibration
= Colour
calibration
(cross-mode)
RAW R, G, B and W with maximum value 255
User
Calibration
Individual colour calibration. Cross-mode
brightness setting of R, G, B and W with values
from 0 – 255. Set
R and G with the middle and right encoder,
then press the middle encoder (Next Colours)
and set B and W again with the middle and
right encoder.
Factory
Calibration
Factory calibration of R, G, B and W
Smart
Calibration
Merging factory and RAW calibration
Autolock = Automatic
locking of the
controls
On Automatic locking of the controls after
approximately 1 minute of inactivity. Display
shown upon attempted use: "Locked!"
Unlock: Simultaneously press the centre and
right encoders for approx. 5 sec.
Off Automatic locking of the controls is disabled
Fan = Fan control Auto Automatic fan speed control
Off Deactivated fan with greatly reduced
brightness
Constant
Low
Constantly low fan speed with reduced
brightness, if necessary
Constant
Medium
Constant average fan speed with reduced
brightness, if necessary
Constant
High
Constant high fan speed