Users Manual Part 1

DMX

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

Protocol ArtNet and sACN

Select by turning the left encoder, confirm by pressing, change value or status by turning,

confirm by pressing. Back with ESC.

Universe Setting the universe 000–255

Universe Group Setting the Universe Group 000 – 127

DMX Address Setting the DMX start address 001–512

DMX Mode Selecting the DMX mode 1CH dim ... 32CH

pixel

IP Address Setting the IP address:

1. Set block with middle encoder

2. Set block with right encoder

Press middle encoder (Next Range)

3. Set block with middle encoder

4. Set block with right encoder

Press left encoder to save (Enter)

xxx.xxx.xxx.xxx

Subnet Mask Setting the subnet mask:

1. Set block with middle encoder

2. Set block with right encoder

Press middle encoder (Next Range)

3. Set block with middle encoder

4. Set block with right encoder

Press left encoder to save (Enter)

xxx.xxx.xxx.xxx

Signal routing Forwarding the control signal via XLR Out Send to XLR

Forwarding the control signal via W-DMX Send to WDMX

Forwarding the control signal via XLR Out and

W-DMX

Send to both

Actuation via XLR with ArtNet or sACN signal

interruption

Backup by XLR