User Manual

43
Cameo D4 / Live
Several other areas of the software can be triggered by DMX. These can be located within the software Preferences.
5.5.Dry Contact Ports
The software can be triggered by one of the 8 dry contact ports available on a compatible DMX interface. To map a port to a
scene, select the scene and then click the Port trigger button within the scene properties window. An asterisk will be shown next
to ports which have already been used. Note that Address 1-255 is a binary address, for example Address 7 is port 1, port 2 and
port 3 together.
Several other areas of the software can be triggered by the dry contact ports. These can be located within the software
Preferences.