User Manual

42
Cameo D4 / Live
properties window. Select the DMX universe and channel number. Values 0-127 will stop the scene and
128-255 will play the scene.
Fader Mapping
To map a DMX input to a fader, right click the fader and select ‘Map to DMX In’. Choose the DMX universe and channel number
and click OK. Several other options are available:
Direct Patch : links the channel fader with the same DMX input channel number
Minimum Value : The value the DMX input should be to set the fader to 0
Maximum Value : The value the DMX input should be to set the fader to 255
Multi-assignment : Allows for the assignment of several channels to 1 DMX input fader. For
example, entering 5+6 will assign the input fader to channels 5 and 6 in the software, entering 5.8
will assign the input fader to channels 5,6,7 and 8. If a multi-assignment is made and ‘Direct Patch’
is selected, the corresponding DMX input fader will be mapped to each of the assigned channel
faders in the software. For example, entering 5+6 when ‘Direct Patch’ is enabled, DMX input
channel 5 will be mapped to channel 5 in the software and DMX input channel 6 will be mapped to
channel 6 in the software.