Instructions

19
DEUTSCH ENGLISH
DMX
FRANCAIS
ESPAÑOLITALIANO POLSKI
Disp Back = Display backlight Off Deactivates after approx. 30 seconds of
inactivity
On Permanently on
Sig Fail = Operating status if
DMX signal is lost
Master/Slave?
Hold Last command is held
Black Activates blackout
User 1 User Color 1 is activated
Power Mode = Battery life and
LED brightness
setting
STD Standard setting with maximum
brightness
ECO Extended battery life at approx. 50%
brightness
IR Remote = Activates or deac-
tivates control via
IR remote control
On Activates control via the IR remote
Off
Deactivates control via the IR remote
Sound = Adjusts the way
the music control
works
Last Color is kept until next pulse
Off Color disappears after a short while
until the next pulse
PWM = LED PWM
frequency
650 Hz,
1530 Hz,
2150 Hz,
4000 Hz
Selects the LED PWM frequency
Calibration = Color calibration Red, Green,
Blue, White
Individual color calibration. Cross-mode
brightness setting of the 4 LED groups
RGBW with values from 0–255
Reset = Resets settings Factory Resets to factory settings: Press ENTER
to reset, MENU to cancel
Preset A Resets to Preset A: Press ENTER to
reset, MENU to cancel
Preset B Resets to Preset B: Press ENTER to
reset, MENU to cancel
Preset C Resets to Preset C: Press ENTER to
reset, MENU to cancel
Edit Preset = Saves all system
settings in 3 indi-
vidual presets
Preset A Press ENTER to save
Preset B Press ENTER to save
Preset C Press ENTER to save
Service = Only for servicing purposes
SYSTEM INFORMATIONEN (System Info)
Starting from the main display, press MENU to go to the main menu. Using  and , now select
the System Info menu option and press EENTER to confirm your selection.