Instructions

16
DEUTSCHENGLISH
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
----Stand Alone----
Auto
Static
Color Preset
User Color
Loop
----Color Preset----
Off
Red
Amber
Yel Warm
Yellow
Green
Turquoise
White
Cold White
Jump
Fade
Speed
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
Cyan
Blue
Lavender
Mauve
Magenta
Pink
Warm White
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
0 - 100
USER COLOR STAND-ALONE MODE
The stand-alone mode User Color makes it possible to save the overall brightness, strobe, and
a color mix of R, G, B, and W to four individual color presets directly on the device.
Starting from the main display, press MENU to go to the main menu. Using the  and 
buttons, now select the Stand Alone menu option and press ENTER to confirm your selection.
Use  and  again to select the stand-alone mode UserColor and press ENTER to confirm
your selection. Now use  and  to select the desired preset (Color 1 to Color 4) and press
ENTER to confirm. Now use  and  to select the menu option you would like to change and
press ENTER to confirm your selection. You can set the value as desired from 000 to 255 using
 and . The strobe effect values correspond to the values in channel 2 of the DMX table 4 CH
mode1. Press ENTER to confirm all entries.
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
----Stand Alone----
Auto
Static
Color Preset
User Color
Loop
-------Color x-------
Dimmer
Strobe
Red
Green
Blue
White
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
----User Color----
Color 1
|
Color 4
LOOP STAND-ALONE MODE
The stand-alone Loop mode allows up to four different color change programs to be individually
designed, saved, and reproduced. Brightness, step time, fade time, and delay (signal delay) can
be set separately.
Starting from the main display, press MENU to go to the main menu. Using the  and 
buttons, now select the Stand Alone menu option and press ENTER to confirm your selection.
Use  and  again to select the stand-alone mode Loop and press ENTER to confirm your
selection. Now use  and  to select the desired loop (Loop 1 to Loop 4) and press ENTER to
confirm your selection.
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
----Stand Alone----
Auto
Static
Color Preset
User Color
Loop
----Loop Mode----
Loop 1
|
Loop 4
---------Loop x---------
Dimmer
Steptime
Fadetime
Delay
1.Step
2.Step
3.Step
4.Step
0 - 100
0.1s - 10.0s
0 % - 100 %
0.0s - 2.0s
Red
Green
Black
-------