Instructions

15
DEUTSCH ENGLISH
DMX
FRANCAIS
ESPAÑOLITALIANO POLSKI
This will take you to the submenu for setting the submenu options (see table, use  and to
select, press ENTER to confirm, use  and  to change the value or status, press ENTER to
confirm). The settings are made separately for each program and remain unchanged even after
the device is restarted.
STANDALONE MODE AUTO / SOUND (PROGRAMME 1 to PROGRAMME 6)
Dimmer Sets brightness 0 - 100
Speed Sets running speed 0 - 100
Sound
Activates/deactivates music-control
Off
Deactivates
music-control
On
Activates
music-control
Sens Sets microphone sensitivity 0 - 100
Delay Delay time for slave groups 0.0s - 2.0s
STANDALONE MODE STATIC
The standalone mode static allows the dimmer, strobe, R, G, B and W values to be set directly on
the device, with values between 000 and 255, in a similar way to with a DMX controller. In this
way, an individual scene can be created without an additional DMX controller.
Starting from the main display, press MENU to enter the main menu. Now use  and  to select
the menu item Stand Alone
and confirm with ENTER. Again use  and  to select standalone
mode Static and confirm with ENTER. Using  and , now select the menu item that you wish
to edit and confirm with ENTER. You can use  and  to configure the desired value between
000 and 255. Confirm all entries with ENTER.
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
----Stand Alone----
Auto
Static
Color Preset
User Color
Loop
----Static Mode----
Dimmer
Strobe
Red
Green
Blue
White
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
0 - 255
COLOR PRESET STAND-ALONE MODE
15 different color presets plus Jump and Fade are available as presets; the brightness can be
configured separately for each preset, as well as the operating speed for Jump and Fade.
Starting from the main display, press MENU to go to the main menu. Using the  and  but-
tons, now select the Stand Alone menu option and press ENTER to confirm. Use  and  again
to select the stand-alone mode Color Preset and press ENTER to confirm your selection. Now
use  and  to select the color you want as a preset and press ENTER to confirm your selection
(Off = Blackout; Speed refers to Jump and Fade). You can set the brightness as desired from 000
to 100 using  and . Confirm with ENTER.