User manual

DMX CABLES:

NOTICE:





could cause a short circuit and erratic behaviour.

SPECIAL NOTE: LINE TERMINATION:









adaptor must be used. The chart below details the correct cable conversion.

Termination reduces signal transmission prob-

lems and interferance. It is always advisable to

connect a DMX terminator, (resistance 120 Ohm

1/4 W) between pin 2 (DMX-) and pin 3 (DMX+)

of the last ﬁxture.

common









10 11

ITALIANOPOLSKIESPAÑOL

FRANCAISFRANCAIS FRANCAISFRANCAIS

FRANCAISDEUTSCHENGLISH