User manual

ManualsBrandsCAMEO ManualsLight EffectsLED PAR stage spotlight No. of LEDs: 151 x

Red Dot

DMX CONTROL MODE:

The Cameo PAR 56 CAN has two DMX modes to choose from, 4 channel or 6

Channel. To access the 4 Channel mode, press the mode button to show a red

dot illuminated under the rst digit of the DMX address. The unit is now ready

for use in 4 channel mode

CHANNEL VALUE FUNCTION

CH1 000-255 RED (0-100%)

CH2 000-255 GREEN (0-100%)

CH3 000-255 BLUE (0-100%)

CH4 000-255 MASTER DIMMER (0-100%)

To access the 6 Channel mode, press the mode button to

show NO red dot under the rst digit of the DMX address.

The unit is now ready for use in 6 channel mode

CHANNEL VALUE FUNCTION

CH1 000-255 RED (0-100%)

CH2 000-255 GREEN (0-100%)

CH3 000-255 BLUE (0-100%)

CH4 0-255 Master dimmer (0-100%)

CH5 0-16

17-255

No function

Strobe/Speed Adjust/Sound Sensitivy Adjust

CH6 0-31

32-95

96-159

160-233

244-255

No function

Colour mixing

RGB colour change

7 colour change

Sound activation

To change from 4 channel to 6 channel mode, press ONLY the mode button repeatedly until you return to the

DMX control mode.

DAISY CHAIN CONNECTION

1) Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the rst xture

2) Connect the end of the cable coming from the rst xture which will have a (female) 3 pin connector to the

input connector of the next xture consisting of a (male) 3 pin connector. Proceed to connect from the output as

stated above to the input of the following xture

and so on.

8 9

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCH

ENGLISH