User manual

27
Point the infrared remote control either directly at the infrared sensor installed on the front or back
of the lighting system. The maximum range is about 8 metres. In the DMX and slave modes, the
functions on the remote control are disabled (battery for IR remote control: CR2025).
Blackout The ON/OFF button is used to switch off all spotlights and laser effects,
regardless of the mode selected on the remote control. Pressing the ON/
OFF button once more activates the previously selected mode again.
Auto Program Auto programs Pr01 - Pr10 (mix programs LED spotlights/strobe/Derby/
laser). Program selection by pressing repeatedly.
Music Control Music controlled programs Pr01 - Pr10. Program selection by pressing
repeatedly. Adjusting the microphone sensitivity on the device (MIC
SENSITIVITY).
Pause Interrupts the program sequence ("freezing" the last scene). Press one
more time to continue the program.
Colour selection Colour selection for the LED spotlights and Derby effects. Reset to Auto or
Sound program by pressing AUTO or MUSIC.
Program Auto programs Pr21 - Pr30 (mix programs LED spotlights/Derby). Program
selection by pressing repeatedly.
Program Auto programs Pr31 - Pr40 (strobe programs). Program selection by
pressing repeatedly.
Program Auto programs Pr41 - Pr46 (laser programs). Program selection by
pressing repeatedly.
Numeric
buttons
To adjust the speed for the auto programs. 0 = slowest, 9 = fastest speed.
Switching between Auto and Music controlled programs.
No function
EN
IR REMOTE CONTROL / IR FERNBEDIENUNG / TÉLÉCOMMANDE INFRAROUGE / MANDO A
DISTANCIA POR INFRARROJOS / PILOT NA PODCZERWIEŃ / TELECOMANDO A INFRAROSSI