Operation Manual

15
DMX
DEUTSCHFRANCAIS
ESPAÑOL
ENGLISH
ITALIANO POLSKI
SUSPENDED INSTALLATION
Important safety notice: Overhead mounting requires extensive experience, including the calculation of the load limit values
of the installation material and regular safety inspection of all installation materials and spotlights. If you do not have these
qualifications, do not attempt to perform an installation yourself. Refer instead to a qualified professional.
For suspended installation, the mounting bracket can be removed completely to create a consistent and discreet appearance.
To do this, loosen and remove both knob screws
A
from the mounting bracket. Remove the sockets
B
on each side of the spotlight with a 3
mm Allen key. Cover the mounting holes
C
with the sliding metal strips in the grooves
D
. Keep all removed components safe for later use.
A B C D
To suspend the spotlight, only the securing lug
E
and an appropriate suitable security cable should be used.
E