Operation Manual

12
DMX
ITALIANO
POLSKI
ESPAÑOL
FRANCAIS
DEUTSCHENGLISH
System Info
Firmware = Displays device firmware Main CPU Vx.xx
LED driver Vx.xx
Temperature = Displays temperature of LED unit LED xx°C / xx°F
Unit °C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
Operation Hours = Displays operating time xx:xx h Displays total operating time in hours and minutes
MANUAL LOCKING FUNCTION
In addition to the ability to protect the lamp automatically from accidental and unauthorised operation (see "Settings" - "Auto-lock"), the con-
trols can also be locked manually. Press and hold the UP and DOWN controls simultaneously for approximately 5 seconds. If an attempt is made
to change settings, "Locked!" will appear in the display and changing the lamp’s settings via the controls is no longer possible. After approx. 1
minute, the current operating mode is displayed again. To unlock, press and hold the UP and DOWN controls simultaneously for approximately
5 seconds.
The display will show the previously displayed information.
IR REMOTE CONTROL
Aim the infrared remote control directly at the infrared sensor on the front of the lamp. The maximum
range is approximately 8 metres. In DMX and Slave modes, the remote control is deactivated. Battery
for IR remote control = CR2025.
Blackout
The blackout button is used to switch off all LEDs, regard-
less of operating mode enabled via the remote control.
Press the blackout button again to reactivate the previously
selected mode.
Auto programme
Auto-Programmes 1 - 6. Programme selection with
and . Programme run speed with and
and
. Brightness setting with and and .
Color macro
Color Macros 1-15. Selection with
and .
Strobe
Strobe light for AUTO, FADE and MANUAL operating modes.
Press to activate. Strobe speed with and .
Press
to deactivate strobe.
Speed
Setting the running speed for Auto and Fade programmes.
Individual color macros
Individual color macros 1-5. Selection with
and .
Brightness
Press
and and to adjust brightness.
Manual color mix
Press
and , , or to manually mix
colors. Adjust intensity with
and .
Fade programmes
Fade programmes Auto 1 - Auto 5. Programme selection
with
and . Programme run speed with and
and . Brightness setting with and
and .
-
Color preset
Direct selection of color presets 0 to 9.