User Manual

2
2. Getting Start with Access Point
2.1 Know the 54Mbps Wireless Network Access Point
Ports:
? Power Receptor
? Reset Button
? RJ-45 Ethernet Port
Straight through cable is required to connect with router or switch
Cross-over cable is required to connect to computer directly
LEDs:
? Power LED: ON when the unit is powered up
? LAN LED: ON indicates LAN connection; BLINK indicates LAN activity
? WLAN LED: ON indicates WLAN is working; BLINK indicates wireless
activity.
2.2 Connect to the 54Mbps Wireless Network Access Point
Build the Infrastructure Mode