User Manual

11
 Key Length, Key Format and WEP Key:
If you select 64bit in Hex format, you must type 10 values in the following
range (0~F, hexadecimal), or 64bit in ASCII format, you must type 5 values in
the following range (0~9, A~Z and a~z Alphanumeric).
If you select 128bit in Hex format, you must type 26 values (0~F, hexadecimal),
or 128bit in ASCII format, you must type 13 values in the following range (0~9,
A~Z and a~z Alphanumeric).
Be sure that the USB Adapter and the wireless station were set in the same key.
Note: After all the settings are completed, click Apply to save the setting.
Advanced
The Advanced settings help you to control the Wireless Adapter to adjust with
wireless devices in certain environment.
 Wireless Mode: (Ad-Hoc mode only)
If the USB WLAN adapter is work with Ad-Hoc mode, there are two functions for
users select, including 11B and 11G. The default setting is 11B, 11G, which is
interoperable with both 11B and 11G devices.
 Power Saving:
To set your Wireless Adapter as power saving mode, select “Off”, “Normal” or
“Maximum”.